ANJI YUHONG CLAY CHEMICAL CO.,LTD

YH-938Y is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.1.Advantages:☆ High gelling efficiency over low to medium polarity organic liquids.☆ Easy of incorporation. No need for polar activator or making pregel.☆ Consistent in rheology and thixotropy development.☆ Excellent sag resistance and high viscosity.☆ Easy of dispersion.2.Typical Properties:ColorAppearanceDensityMoisture(@105℃,Website:://.organophilic-clay.com,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )Light YellowFree Flowing Powder1.7g/cm3≤3.5%≥98%≤38%3.Typical Applications:●Acrylic paint●Road paint●Alkyd paint●Silica paint●Anti-corrosion paint●Solvent epoxy paint●Bituminous paint●Nitro lacquer●Chlorinated rubber paint●Inks(Mineral oil)●Marine paint●Inks(Nitro)●Non-solvent epoxy paint●Lubricating grease●Polyester paint●Adhesive●Primer paint4.Incorporations:YH-938Y belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, YH-938Y does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.  5.Recommended Levels:The amount of YH-938Y rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.6.International Counter types: Bentone®SD-3, Claytone®AFNOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. The products discussed are sold without warranty, express or implied, including a warranty of merchant ability and fitness for use. Purchases will be subject to a separate agreement which will not incorporate this document.